ADR SOL POWDER
Page >> FAQ

Your Health

Is Our Priority.

ADR SOL will protect you against Mold, viruses, bacteria and low-frequency electromagnetic radiation

Contact Us

ADR SOL – Frequently Asked Questions (FAQ)

(ADR SOL WALLS & ADR SOL FABRIC)
ADR SOL is an advanced, water-based surface treatment technology that enhances walls and fabrics by modifying their physical surface properties. It works passively and continuously, without releasing chemicals or using added biocides.
ADR SOL uses dielectric material technology to influence the surface environment. This creates conditions that are less favourable for the persistence of microorganisms, without relying on chemical action or active substances.
Yes. Surfaces treated with ADR SOL reduce the presence of microorganisms such as bacteria, viruses, and mold by over 99% under normal environmental conditions, without the use of additional biocides.

ADR SOL WALLS – FAQ

ADR SOL WALLS is best applied over water-based paints. If the final surface is hydrophobic, oil-based, or varnished, ADR SOL WALLS should be applied as a primer before the final coating.
No. When applied to clean, dry, and fully cured surfaces, ADR SOL WALLS does not affect paint adhesion or durability.
No. It is completely transparent and does not change the appearance of the wall.
ADR SOL WALLS is long-lasting after a single application, provided the surface remains intact and is not repainted or physically damaged.
It is suitable for: Homes, Schools, Offices, Hospitals, Public buildings
Yes. It is water-based, odourless after application, and does not emit harmful substances.

ADR SOL FABRIC – FAQ

The effect lasts until the next wash. After washing, simply reapply by rinsing the fabric again in the ADR SOL solution.
No. It is gentle on textiles and has less impact than typical detergents or fabric softeners when used as directed.
No. The treatment is invisible and does not affect softness, colour, or breathability.
Yes. Treated fabrics may contribute to reducing the persistence of microorganisms on their surface under normal use conditions.
Fabrics are soaked or rinsed in a diluted solution and then allowed to dry naturally.
Yes. The product has been tested by Hamilton Laboratory and was found to be well tolerated in dermatological testing with human volunteers.

Safety & Environmental Questions

No. ADR SOL products do not contain added biocidal agents and do not work through chemical release.
Yes. ADR SOL is water-based, non-emitting, and works through physical properties rather than chemical action.
Yes. ADR SOL products are suitable for use in schools, homes, and healthcare environments when applied according to instructions.

If you have any more questions, don't hesitate to contact us.

Contact Us
0
    0
    Your Cart
    Your cart is empty