ADR SOL FOR WALLS
ADR SOL Walls 160g
Product Description:
This water-soluble powder is designed for the treatment of walls painted with
water-based paint. The treated surface provides effective protection against
variable electric fields (up to approx. 100 kHz) emitted by electrical
installations. Studies have shown that this reduction has beneficial effects on
living organisms—such as improved sperm motility, a 50% average decrease in
malformed carrot seedlings, and increased germination energy. A similar
shielding effect was observed in the growth of dwarf beans.
It reduces the presence of mold, viruses, and bacteria on surfaces by over 99%.
It allows the Earth’s natural electric field and information signals (e.g.
Wi-Fi) to pass through.
No grounding is required.Screening has a beneficial effect on living organisms, as shown in published medical and biological studies described on the website: https://adrsol.euromegaproducts.com/scientific-research-effects-of-electromagnetic-fields
Application:
This transparent treatment solution can be used before painting or on freshly
or previously painted (cleaned) walls. It is also suitable for use on
wallpaper, drywall panels, and roof membranes.
Apply with any method (roller, brush, or spray) until the wall no longer
absorbs the solution.
For
hydrophobic paints (e.g. stain-resistant), it is recommended to apply the
treatment before painting.
If the substrate is also hydrophobic, a primer should be used first.
If you want to apply the treatment as a finishing layer, a test is recommended
to ensure that no tackiness appears after drying.
Preparation Instructions:
As a primer layer (before painting): dissolve in 1 liter of lukewarm water (coverage approx. 22 m²)
As a final layer (after painting): dissolve in 2 liters of lukewarm water (coverage approx. 35 m²)
Mix the solution thoroughly and let it sit for 12 hours until the ingredients fully dissolve. Stir again before use.
Technology of Operation:
The treated surface shields against variable electric fields through absorption and exhibits high dielectric loss, resulting in a reduction of mold, viruses, and bacteria by more than 99%
The antimicrobial effect occurs only when the treatment penetrates the paint layer or vice versa and both are completely dried. The virus-reducing action does not occur with the paint or treatment alone. The reduction of microorganisms confirmed in studies does not constitute a declaration of biocidal activity. The product acts purely through physical means – it contains no active substances and does not trigger chemical reactions.
The protective layer formed by ADR SOL Walls uses physical phenomena such as dielectric relaxation of water molecules trapped in the material's structure, cyclic remagnetization, and the accumulation and discharge of spatial electric charge at grain boundaries—according to the Maxwell–Wagner–Sillars mechanism.
The product contains no active substances classified as biocidal under Regulation (EU) No. 528/2012, causes no chemical reactions, and does not require registration as a biocidal product. Its antimicrobial action is purely physical.
Surfaces coated with an aqueous solution containing ADR SOL demonstrated strong virucidal (ProChimia Surfaces Sp. z o.o.: Report No. 1/2021) , bactericidal (M&R LAB Microbiology & Research: Research Report No. 21/2024), and mold (M&R LAB preservatives in a coating against fungi) properties, although the additive and solution did not contain biocidal agents. This effect is related to the physical interaction obtained by discharging the accumulated spatial electric charge with high dielectric loss of the dried surface (IFM PAN: Protocol 4/2018 and Test Report 1/2018).
Products using ADR Technology have received international patents.
Basic composition: hydrates, aluminosilicates, stabilizers
